The APVST Flat Strap works for Timber in both nominal and rough sizes. It can be used to connect two beams together or added to any project as a decorative accent.Installs with the Outdoor Accents structural screw and hex-head washer. Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the NZ Strength Reduction Factorφ), and applicable the k modification factors following NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation. The APBO-KT decorative bottle opener is a three-piece kit that installs easily with the included screws and works well with both the Outdoor Accents Mission Collection ®and Avant Collection ™. For Australia, the Capacity Factor (φ) is 0.85 for screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern. For NZ, the Strength Reduction Factor (φ) is 0.80 for nails in lateral loading. From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

Load is always the first consideration when buying jiffy hangers. In addition to determining size, it may also determine the type. Our S impson face fix joist hangers, for example, will typically support a lesser down load than a top-flange mount. They won’t demand the same sort of access requirements that a top-flange hanger will.

Ask a Question

Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor, and applicable the k modification factors following AS 1720.1 or the NZ Strength Reduction Factor (φ), and applicable the k modification factors following NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation. These gable plates provide reinforcement for a connection from a timber beam to three angled timber braces for 45 degree pitch gable. Two sizes are available: (1) APVGP1212-4 suits 90mm (w) or larger timber; APVGP1212 suits 140mm (w) or larger timber. Uplift loads have been increased for wind or earthquake or seismic with no further increase allowed; reduce where others govern.

The APLH Concealed Joist Hanger is a face‑mounted concealed flange hanger solid timber sections. Ideal for end of ledger/header or post conditions, it also provides cleaner lines for pergolas. Outdoor Accents 90 degree Angles tie together beams, rafters and more. These angles make structural connections between beams and posts stronger and provide consistent, straight corners for a variety of outdoor projects. The APVA90Angle is designed for use with 90mm or larger post; The APVA50Angle is designed for use with 45mm rafter.The APVDMW56-M decorative washer installs easily with the structural SDWS Timber screw and hex‑head washer combination and can be used in a variety of timber-to-timber connections. The plans may call for innovative angles, sloping roofs and adventurous flying buttresses. When you’re the one bringing the plans to life, you’ll welcome a little help. That’s where our skewed and sloped joist hangers come in, giving you the construction freedom to escape the traditional right angle. Concealed Joist Hanger with internal flange for concealed fixings, provides cleaner lines for outdoor structures Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4 and New Zealand timber grade SG8.

The flat T Strap Tie and L Strap Tie bring decorative flair and lateral strength to your outdoor living space or even an indoor project. They provide reinforcement for connections where one timber piece intersects another at a 90° angle. They're designed to accommodate multiple timber sizes and to be installed with Outdoor Accents ®structural timber screws and hex-head washers. Post bases secure timber posts to concrete, while providing a 25mm standoff height to help prevent rot from standing water and ground moistureWith nearly 60 years of field and R&D experience, Simpson Strong-Tie ®timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job. Fastener and washer create decorative bolt-like connections but install with the ease of a screw and without predrilling Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4 and New Zealand Joint Group J5 per NZS 3603 Table 4.1.