Parrot MKi9100 Hands-Free Car Kit

Product Information

Perform a Bluetooth search from your phone and select the 3200LS. The 3200LS will then generate a 4 digit pairing code on it’s screen. After you enter the update process it is vital that it is not interrupted – you MUST wait for the unit to re-boot itself. If the unit does not re-boot after a minimum of 5 minutes, something has gone wrong. Unfortunately, your choices at this stage are rather limited. With its OLED screen, you can see all the information you need: the caller’s name, the telephone’s content and certain settings that you have set yourself. CHOOSE VOICE RECOGNITION On the MKi9000 press the centre button on the remote control and rotate to Settings menu. Enter the Settings menu and rotate to “Update Software”.

I have been using my MKi9100 for about a year, when it started having troubles. The pairing process passes, but during it a message “memory full” flashes on the screen. Have tried to reset to factory as it is described. Sometimes during the reset the system comes to a halt with a message “reseting to factory” or so. Left it on for an hour or so. Nothing happened. Switched of the ignition, reset again. Reboot, language change, home screen – everything is ok. Pairing process goes the same way – I can find mki9100 in my phone list as paired, and S10+ in parrot as paired. But during the pairing process the “memory full” flashes again. As I try to reconnect the phone – nothing is happening. Have tried different phones – no help. Software is no. 3 with some following numbers 🙂 Any suggestions? Have not tried to disconnect the car battery. I will do it now. It is possible to perform a factory reset using the vehicle steering wheel buttons if the Parrot Unika interface is fitted.From memory you are correct that you need display version 3.1 for the Unika to work. This display version is set by hardware in the screen and cannot be updated. When we were installing MKi9100’s + Unika and the version was wrong Parrot would send us an updated screen and we would return the old one. After you enter the update process it is vital that it is not interrupted – you MUST wait for the unit to re-boot itself after the screen goes blank. If the unit does not re-boot after a minimum of 5 minutes, something has gone wrong. Unfortunately, your choices at this stage are rather limited. Hi I have a mki92100 kit. For some reason the display screen only shows half the output? The left hand side of the screen is blank. Is this an error of the screen or the control box. It is difficult to navigate as you cannot see a lot of the test. Plus I cannot factory reset as I cannot see this command. I have tried deleting the memory with no joy? I am thinking of getting a replacement screen but won’t if it will not help. Could 1/2 of the screen be dead? After the re-boot it may be necessary to set the language version again. Simply select the required language from the listed options and press remote control centre button to set the language. The MKi9100 will then re-boot again. Some early versions of the MKi9100 will require an interim update to V1.96 to be performed first, so you will need this file and also V2.11 or V2.20. If your software version is V1.95 or less you MUST update to V1.96 first. From version 2.00 software the MKi series support “multipoint”– this allows the connection of 2 phones at the same time and is enabled in the Bluetooth settings.

Please note that the how2 section can only be accessed when you become a Regular member by participating in the forum for a while. If you need immediate access there is the option to become a 'Full Member' by purchasing a subscription.The Parrot MKi9200 may require a reset to clear the paired phones or reset some settings which have been accidentally changed. Your control box was a V1.50 originally but has already been updated to V2.20. Both versions have the same reset procedure.